Buy TIMER 1530 TT 1 HR (WEBASTO P/N 35968B) (#W35968B) from PerfProTech.com. TIMER 1530 TT 1 HR.

Timer Installation CAUTION Check behind panels for obstructions before drilling holes. ATTENTION Before installing the timer, please confirm the installation location with the customer. Affix supplied template to panel. Drill 10 mm (25/64 in.) and 2.5 mm (3/32 in.) holes where indicated on template.

ATTENTION Do not over tighten mounting screw. Carefully align timer harness plug with socket on rear of timer and push into socket until seated. Place the timer into position and secure with screw provided. Tighten screw until the timer with foam cushion is firmly seated against panel.

Install cover over screw. Operation: Operation of the timer is designed so that the symbols flash rapidly in the setting mode. If no button is pressed within 5 seconds, the displayed time will be saved. The display changes at high speed when the and buttons are pressed for more than 2 seconds.

Whenever the power supply to the timer is disconnected, all previously programmed settings will be lost. Switching On: Manually: by pressing the 'Manual Operation' button (continuous heating mode). The heating time and the symbol for heating operation are displayed. The heating time display disappears after 10 seconds. Automatically: upon reaching the preset starting time for heating.

The program number and the symbol for heating are displayed. Switching Off: Manually: by pressing the 'Manual Operation' button. Automatically: via the programmed end time. The display field goes out when the heating time expires. Setting the Time: This function is not available when heating mode is active! Press and hold the button.

Press the 'Forward' or 'Reverse' button as well. The time of the day is displayed and the clock symbol flashes. Set the time via the 'Forward' or 'Reverse' buttons. The set time is saved when the display goes out or by pressing the button.

Viewing the Time: Press the 'Forward' or 'Reverse' button. Program Start of Heating: Press the button. Press the 'Forward' or 'Reverse' buttons within 10 seconds until the required time for starting heating operation is displayed.

If a different program number is required, the button must be pressed within 10 seconds. Default start settings: Time 1: 06:00 hours or 6:00 am Time 2: 16:00 hours or 4:00 pm Time 3: 22:00 hours or 10:00 pm NOTE: The default settings are overwritten when new values are entered. The preset times are saved until changed.

대문이 뻔떡뻔떡 거려서 깜짝 놀랬다 아이가 잘 지내지? View Article Name 영경 2009-11-11 15:41:22| Hit: 19134| Vote: 6 Subject 아노리우 보시오~ 헬로우 아노리우! 궁금하다~ 그림 좋게 봐줘서 고맙다. Zhivie oboi na rabochij stol windows 7 vesna download. 그래야 아노류지.ㅎㅎㅎ 암튼 이전보다 풍성하고 성숙해진 너의 그림 반갑고 기쁘게 잘 잘 보고 간당// anoliw (2009-11-13 23:24:53) 영경아 참 오랜만이구나. 작품 보고 있는데, 학부 졸업전시 때 즈음보다 좋다 물론 할 말 무쟈게 많이 보이는 건 여전하네 그럼.

The default settings are restored when the timer is disconnected from the on-board power supply. Deactivate Preset Time: Briefly press the button. Select Preset Time: Press the button within 10 seconds until the program number with the required preset time is displayed. The active mode (heating ) and the program number flash. Set Heating Duration Time: Press and hold the button.

Press the 'Forward' or 'Reverse' button as well. Release both buttons.

The time and clock symbol are displayed. Press and hold the button again. Press the 'Forward' or 'Reverse' button as well. Release both buttons. The preset time is displayed and the heating symbol and ventilation symbol flash.

Set the heating time via the 'Forward' or 'Reverse' buttons. The set heating time is saved when the display goes out or by pressing the button.